====================================================================== * SMC Networks, Inc. * * SMC EZ Card 10/100 (SMC1211TX) * * NetWare Server Driver Installation Overview * * * * Copyright (C) 1998 by SMC Networks, Inc. * * All rights reserved. * ====================================================================== Contents: A. File Description B. Driver Installation for NetWare Server 3.1x, 4.x and 5.x C. Parameters Description for SMC1211.LAN A. File Description -------------------- ------------------------------------------------------------------------------- Filename Description ------------------------------------------------------------------------------- SERVER.TXT This file. Presents a summary of the contents for NetWare Server driver installation. SMC1211.LAN SMC 32-Bit ODI Server driver for SMC1211TX. This driver complies with NetWare ODI Server driver SPEC 3.31. SMC1211.LDI The driver (SMC1211.LAN) installation information file for NetWare Server 4.X, NeDOS32, Windows 3.x. 3.12\ETHERTSM.NLM NetWare Server 3.1X LAN driver Topology Specific Module(TSM) for Ethernet. 3.12\NBI31X.NLM NetWare Server 3.1X Bus Interface module. 3.12\MSM31X.NLM NetWare Server 3.1X LAN driver Media Support Module(MSM). 4and5.X\ETHERTSM.NLM NetWare Server 4.X and 5.X LAN driver Topology Specific Module(TSM) for Ethernet. 4and5.X\NBI.NLM NetWare Server 4.X and 5.X Bus Interface module. 4and5.X\MSM.NLM NetWare Server 4.X and 5.X LAN driver Media Support Module(MSM). ------------------------------------------------------------------------------- B. Driver(Spec. 3.31) Installation for NetWare Server 3.1x, 4.x and 5.x B.1 Driver Installation for NetWare Server 3.12 1. Insert the SMC1211TX Driver Diskette in your PC's floppy drive (A: or B:). 2. Change to the NetWare Server directory (for example: CD\SERVER.312) 3. Copy the following files from the Driver Diskette to the NetWare Server directory. \NETWARE\ODI\SERVER\3.12\NBI31X.NLM \NETWARE\ODI\SERVER\3.12\MSM31X.NLM \NETWARE\ODI\SERVER\ETHERTSM.NLM \NETWARE\ODI\SERVER\SMC1211.LAN 4. Sample AUTOEXEC.NCF for NetWare Server 3.12 AUTOEXEC.NCF ============ LOAD C:NBI31X LOAD C:MSM31X LOAD C:ETHERTSM LOAD C:SMC1211 FRAME=ETHERNET_802.2 NAME=E_8022 LOAD C:SMC1211 FRAME=ETHERNET_802.3 NAME=E_8023 LOAD C:SMC1211 FRAME=ETHERNET_II NAME=E_II LOAD C:SMC1211 FRAME=ETHERNET_SNAP NAME=E_SNAP BIND IPX E_8022 NET=10 BIND IPX E_8023 NET=20 BIND IPX E_II NET=30 BIND IPX E_SNAP NET=40 B.2 Driver Installation for NetWare Server 4.X 0. Copy the following files from the Driver Diskette to the NetWare Server directory. \NETWARE\ODI\SERVER\4and5.X\NBI.NLM \NETWARE\ODI\SERVER\4and5.X\MSM.NLM \NETWARE\ODI\SERVER\4and5.X\ETHERTSM.NLM 1. Change to the NetWare Server directory (for example: CD\NWSERVER ) 2. Load the NetWare Server System by typing SERVER, then press . 3. When the Server prompt appears, load the NetWare Server Installation Utility. I.e., :LOAD INSTALL 4. Select "Driver options" from the "Installation Options" menu, then press . 5. Select "Configure network drivers" from the "Driver Options" menu, then press . 6. Select "Select a driver" from the "Additional Driver Actions" menu, then press . 7. Press to install an unlisted driver, then press to specify a different path. 8. Insert the SMC1211TX Driver Diskette to your PC's floppy drive and specify the drive, e.g., A:\NETWARE\SERVER. 9. Select "SMC EZ Card 10/100 (SMC1211TX) Driver" from the "Select a driver to install:" menu, then press . 10. If necessary, select "Select/Modify driver parameters and protocols" from the "Board SMC1211_1 (Driver SMC1211) Actions" menu, then press to set up the driver parameters. (Please refer to section C. Otherwise, select "Save parameters and load driver", then press . 11. Follow instructions to complete the driver installation. 12. Sample AUTOEXEC.NCF for NetWare Server 4.X AUTOEXEC.NCF (one board) ======================== LOAD C:SMC1211 FRAME=ETHERNET_802.2 NAME=E_8022 LOAD C:SMC1211 FRAME=ETHERNET_802.3 NAME=E_8023 LOAD C:SMC1211 FRAME=ETHERNET_II NAME=E_II LOAD C:SMC1211 FRAME=ETHERNET_SNAP NAME=E_SNAP BIND IPX E_8022 NET=10 BIND IPX E_8023 NET=20 BIND IPX E_II NET=30 BIND IPX E_SNAP NET=40 AUTOEXEC.NCF (two boards) ========================= LOAD C:SMC1211 SLOT=3 FRAME=ETHERNET_802.2 NAME=E_8022_1 LOAD C:SMC1211 SLOT=3 FRAME=ETHERNET_802.3 NAME=E_8023_1 LOAD C:SMC1211 SLOT=3 FRAME=ETHERNET_II NAME=E_II_1 LOAD C:SMC1211 SLOT=3 FRAME=ETHERNET_SNAP NAME=E_SNAP_1 LOAD C:SMC1211 SLOT=4 FRAME=ETHERNET_802.2 NAME=E_8022_2 LOAD C:SMC1211 SLOT=4 FRAME=ETHERNET_802.3 NAME=E_8023_2 LOAD C:SMC1211 SLOT=4 FRAME=ETHERNET_II NAME=E_II_2 LOAD C:SMC1211 SLOT=4 FRAME=ETHERNET_SNAP NAME=E_SNAP_2 BIND IPX E_8022_1 NET=10 BIND IPX E_8023_1 NET=20 BIND IPX E_II_1 NET=30 BIND IPX E_SNAP_1 NET=40 BIND IPX E_8022_2 NET=50 BIND IPX E_8023_2 NET=60 BIND IPX E_II_2 NET=70 BIND IPX E_SNAP_2 NET=80 B.3 Driver Installation for NetWare Server 5.X 0. Copy the following files from the Driver Diskette to the NetWare Server directory. \NETWARE\SERVER\4and5.X\MSM.NLM \NETWARE\SERVER\ETHERTSM.NLM \NETWARE\SERVER\ACCODI.LAN 1. Change to NetWare Server directory (for example: CD\NWSERVER ) 2. Load the NetWare Server System by typing SERVER, then press . 3. When the Server prompt appears, load the NetWare Server Installation Utility. That is, :LOAD NWCONFIG 4. Select "Driver options" from the "Installtion Options" menu, then press . 5. Select "Configure network drivers" from the "Driver Options" menu, then press . 6. Select "Select a driver" from the "Additional Driver Actions" menu, then press . 7. Press to install a unlisted driver, then press to specify a different path. 8. Insert SMC1211TX Series Driver Diskette in your PC's floppy drive and specify the path A:\NETWARE\SERVER. 9. Select "SMC EZ Card 10/100 (SMC1211TX) Driver" from the "Select a driver to install:" menu, then press . 10. If necessary, select "Select/Modify driver parameters and protocols" from the "Board SMC1211_1 (Driver SMC1211) Actions" menu, then press to set up the driver parameters. Otherwise, select "Save parameters and load driver", then press . 11. Follow instructions to complete driver installation. 12. Sample AUTOEXEC.NCF for NetWare Server 5.X AUTOEXEC.NCF (one board) ======================== LOAD C:ACCODI FRAME=ETHERNET_802.2 NAME=E_8022 LOAD C:ACCODI FRAME=ETHERNET_802.3 NAME=E_8023 LOAD C:ACCODI FRAME=ETHERNET_II NAME=E_II LOAD C:ACCODI FRAME=ETHERNET_SNAP NAME=E_SNAP BIND IPX E_8022 NET=10 BIND IPX E_8023 NET=20 BIND IPX E_II NET=30 BIND IPX E_SNAP NET=40 AUTOEXEC.NCF (two boards) ========================= LOAD C:ACCODI PCI_SLOT=3 FRAME=ETHERNET_802.2 NAME=E_8022_1 LOAD C:ACCODI PCI_SLOT=3 FRAME=ETHERNET_802.3 NAME=E_8023_1 LOAD C:ACCODI PCI_SLOT=3 FRAME=ETHERNET_II NAME=E_II_1 LOAD C:ACCODI PCI_SLOT=3 FRAME=ETHERNET_SNAP NAME=E_SNAP_1 LOAD C:ACCODI PCI_SLOT=4 FRAME=ETHERNET_802.2 NAME=E_8022_2 LOAD C:ACCODI PCI_SLOT=4 FRAME=ETHERNET_802.3 NAME=E_8023_2 LOAD C:ACCODI PCI_SLOT=4 FRAME=ETHERNET_II NAME=E_II_2 LOAD C:ACCODI PCI_SLOT=4 FRAME=ETHERNET_SNAP NAME=E_SNAP_2 BIND IPX E_8022_1 NET=10 BIND IPX E_8023_1 NET=20 BIND IPX E_II_1 NET=30 BIND IPX E_SNAP_1 NET=40 BIND IPX E_8022_2 NET=50 BIND IPX E_8023_2 NET=60 BIND IPX E_II_2 NET=70 BIND IPX E_SNAP_2 NET=80 C. Parameter Description for SMC1211.LAN The following parameters are used in SMC1211.LAN. 1. SLOT : specifies which adapter is enabled when multiple SMC1211TX adapters are found in your computer. The SLOT keyword is an index value corresponding to the PCI BIOS. The mapping from SLOT to physical PCI slot is different from one machine to another. Ex: LOAD SMC1211 SLOT=3 FRAME=ETHERNET_802.2 LOAD SMC1211 SLOT=4 FRAME=ETHERNET_II 2. FRAME : specifies which frame type is used by the driver. Accepted values are Ethernet_802.2, Ethernet_802.3, Ethernet_II and Ethernet_SNAP. Multiple frame types can be enabled by loading the same driver with different FRAME type. Ex: LOAD SMC1211 FRAME=ETHERNET_802.2 LOAD SMC1211 FRAME=ETHERNET_802.3 LOAD SMC1211 FRAME=ETHERNET_II LOAD SMC1211 FRAME=ETHERNET_SNAP 3. NODE : Use a different address to replace the node address burned into the EEPROM. Ex: LOAD SMC1211 NODE=0000E8001122 4. Medium : specifies which medium type is used by the driver. Accepted values are AUTO, 100FULL, 100HALF, 10FULL and 10HALF. Ex: LOAD SMC1211 SLOT=3 FRAME=ETHERNET_802.2 Medium=100FULL --- All trademarks and brand names mentioned belong to their respective owners. -- End of File --