This document contains information about  Fast Ethernet Adapter driver for 
Macintosh Power Mac series.  We urge you to read this document to gain some 
understanding of this product. This document address the following topics:

1. Software Installation
2. Setting up Open Transport
3. Setting up the TCP/IP

1. Software Installation
1. Place the file "FastEthMacOS9x.sit" on the desktop.
2. Unstuff the file "FastEhtMacOS9x.sit" using "StuffIt Expander" to "Fast Ethernet
    for Mac OS 9.x" folder	on the desktop.
		  Note: You can get "StuffIt Expander" from http://www.aladdinsys.com/expander
3. Double-click the "Installer" icon in the "Fast Ethernet for Mac OS 9.x" folder. The 
    installer program examines your computer and installs the appropriate driver 
    according to your selection.

2. Setting up the AppleTalk Control Panel
1. Select the "Control Panels" from the Apple Menu.
2. Select "AppleTalk" from the Control Panels submeu. 
3. Click the "Connect via:" dropdown list box to show available communication
		  connections.
4. Select the slot where the adapter is installed.
5. Close the AppleTalk control panel. A dialog box will appear asking whether you 
		  want to save changes. Click the "Save" button.

3. Setting up the TCP/IP
1. Select "Control Panels" from the Apple Menu.
2. Select "TCP/IP" from te Control Panels submenu.
3. Click the "Connect via:" dropdown list box to show available communication 
		  connections.
4. Select the slot where the adapter is installed.
5. Close the TCP/IP control panel. A dialog box will appear asking whether you want
		  to save changes. Click the "Save" button.