Overview
The purpose of this file is to allow for the Manual installation of 
Windows NT4.0 Workstation or Server with the SMC PCI Adapters.

Supported Adapters:

SMC1211TX 10/100 


This software distribution has unattended files and sample scripts
for WindowsNT 4.0 Workstation and Server.

The sample Unattended script is:

WindowsNT 4.0 Workstation/Server  =   /UNATTEND.TXT

The WindowsNT 4.0 Workstation/Server script has been designed to install NT with 
the following options: (your site could have different requirements)

·	FileSystem 	  ===>	FAT
·	Workgroup  	  ===>	WORKGROUP, ie not into a DOMAIN
·	NT root directory ===>	\WINNT40
·	Networking protocols used ===> NetBEUI, IPX
				       
Note : For best results with multiple machines it is recommended that you 
use this file in conjunction with an UDF file to customize 
options such "ComputerName" and "FullName".

Installation Steps:

1) Extract the Compress file.
2) Create a new Subdirectory structure on your Network Installation Server
   within the WindowsNT distribution share point. The new directory structure
   is shown in the Example below:

	EXAMPLE:  F:\WINNT\i386	  -   Distribution Share Point on Server
	    ADD:  \$OEM$\NET\SMC  -   Directory Structure

   The directory structure once completed should look like this:

	EXAMPLE:  F:\WINNT\I386\$OEM$\NET\SMC	


3) Copy the SMC Drivers into the new SMC subdirectory:

	EXAMPLE: UNATTEND.TXT
		 SMC1211.SYS
		 OEMSETUP.INF
	

4) If you are using your own Unattend.txt file please take note of the
   sections below.  Please add these sections to your existing script 
   file:
	[Unattended]
	OemPreinstall = yes

	[Network]
	InstallAdapters = SelectedAdaptersSection

	[SelectedAdaptersSection]
	SMC1211 = OEMAdapterParamSection, \$OEM$\NET\SMC	

	[OEMAdapterParamSection]


Command line execution

Start NT installation with the following command line
{source}\winnt.exe /B /S:{source} /U:{source}\$OEM$\NET\SMC\UNATTEND.TXT. 
Where {source} is the source drive and source directory on the distribution 
software server. In this example the share point directory is called 
F:\WINNT\I386.

This Example assumes that it is executed from within the I386 Directory.

   EXAMPLE:  WINNT /B /S:F:\WINNT\I386 /U:F:\WINNT\I386\$OEM$\NET\SMC\UNATTEND.TXT

For further information on using attended installation with Microsoft 
Windows NT Workstation or Server see Windows NT Resource Kit or contact 
Microsoft Corporation. 


SMC Networks, Inc.

This commercial computer software and documentation is provided with RESTRICTED 
RIGHTS.  Use, duplication, or disclosure by the Government is subject to 
restrictions set forth in subparagraph (c) (1) (ii) of the Rights in Technical 
Data and Computer Software clause at DFARS 252.227-7013, or subparagraphs (c) 
(1) and (2) of the Commercial Computer Software -- Restricted Rights clause at 
FAR 52.227-19, or Alternate III of the Rights in Data - General clause at FAR 
52.227-14, as applicable.  The manufacturer / subcontractor is SMC Networks, Inc.
6 Hughes, Irvine CA.

SMC and Standard Microsystems are registered trademarks; and EtherPower, EtherPower^2, 
EtherPower 10/100, EZStart, and SuperDisk are trademarks of Standard Microsystems 
Corporation. Other product and company names are registered trademarks or trademarks 
of their respective holders.