1. Plug SMC1211TX adapter into one of the Master PCI

slots of your PCI platform.

2. Turn the power ON and then boot into Windows NT.

3. Click the "My Computer" icon in the Main Program Group.

4. Click the "Control Panel" icon in the Main window.

5. Click the "Network" icon in the Control Panel window.

6. Select the "Adapters" item, and then click the "Add..." button

in the "Network" dialog box.

7. Select "<other> Requires disk from manufacturer" from the Network

Adapter Card list, and then click the "Continue" button in the

"Add Network Adapter" dialog box,

8. Insert the SMC1211TX Driver Diskette in your floppy drive.

9. Click the "Have Disk..." button in the "Select Network Adapter"

dialog box.

10.Enter the full pathname A:\ of the driver installation

information file (OEMSETUP.INF) in the "Insert Disk" dialog box,

and then click the OK button.

11.Select "SMC EZ Card 10/100 (SMC1211TX)" and then

click the OK button in the "Select OEM Option" dialog box.

12.Select the Line Speed value (AUTO,10ofull,100half,10full,

10half) and then click the OK button in the "Select Line Speed" dialog box.

13.Windows NT will copy the driver (SMC1211.SYS)

to C:\WINNT\SYSTEM32\DRIVERS directory and the OEMSETUP.INF

to C:\WINNT\SYSTEM32 but rename it to another

installation information file (OEMNADxx.INF). So the next time, if you want to

add SMC1211TX adapters to your system, you do not need the floppy diskette again.

14.After that, installation is completed. You can see:

"[x]SMC EZ Card 10/100 (SMC1211TX)"

in Network Adapters list in the "Network" dialog box.

15.To complete network installation, remember to bind the adapter to

the transport drivers by choosing the "Bindings" button in the

"Network" dialog box.

16.Click the "Close" button in the "Network" dialog box.

17.Remove the SMC1211TX Driver Diskette from your floppy drive.

18.Restart your computer to initialize the network function.