This directory contains three files:

   1. README_D.TXT
   2. QUICKSET.EXE
   3. PSCONFIG.EXE

README_D.TXT is used to explain how to use QUICKSET and PSCONFIG to
install and manage your  print servers. It is also used to
provide release notes for newer versions of your  print server
and its utilities.

QUICKSET.EXE is an express setup program that configures the 
print server with default settings. For more information, please quit 
browsing this file and type QUICKSET [Enter].


PSCONFIG.EXE 

PSCONFIG is a menu-driven utility that provides some equivalent functions as 
those found in WPCONFIG.  To use this program, simply copy it from the 
CD to any hard drive and run it under the DOS prompt.  
PSCONFIG.EXE lets you to install your  print server using PCONSOLE.
When finished with PSCONFIG, use PSCONFIG to inform print server to login 
to the file server.

***** How to use Quickset.Exe to Setup your  print server *******

    1.Connect print cables and network cable to your  print server.
      If using installing the MIO model, insert it into your HP printer/plotter
      and connect the network cable to your MIO print server.

    2.Connect power adapter to your  print server to power it up
      or If installing the MIO model, power up the HP printer with 
      MIO print server plugged in.

    3.Turn on or reboot your workstation and Login to the file server with
      supervisory rights.

    4.Insert the utility CD into your PC. Assume that it is
      inserted into drive d:.

    5.Execute QUICKSET.EXE.
      Log on to drive b:, to configure your device to be print server,
      type

                        QUICKSET SCnnnnnn [Enter]

      where SCnnnnnn is the default unit name recorded on the bar code label
      on the back of the  print server case or on the 
      MIO print server board. A status message will appear on the screen. If Quickset
      is successful, your  print server is installed with default
      configuration, and ready to service queues P1, P2 and SP, where P1 is for
      parallel port 1, P2 is for parallel port 2 and SP is for serial port.
      If Quickset is unsuccessful, a message will appear to inform you with
      possible reasons and actions to take.

      To configure your device to be remote printer, type

                        QUICKSET SCnnnnnn X

      Where X is the name of the print server to be logged in. 
      print server will be configured as remote printer(s) to service queues
      P1, P2 and SP attached by X.

    6.With the following command, you can send a file to the parallel port 1
      of your  print server.

      NPRINT your_file_name /Q=P1 /NB /NT /NOTI

    7.With the following command, you can send a file to the parallel port 2
      of your  print server that has parallel port 2.

      NPRINT your_file_name /Q=P2 /NB /NT /NOTI

    8.With the following command, you can send a file to the serial port
      of your  print server that has serial port.

      NPRINT your_file_name /Q=SP /NB /NT /NOTI


[HOW TO USE TRACE LOG]

psconfig.exe  S   F  D xxxx.log [password] 

xxxx.log log file name
without xxxx.log ,default is trace.log

without correct password ,log file will be encrypted.