This Print Server Configuration utilities contains the
following files:

SETUP.EXE
SETUP.LGO
SETUP.INS
SETUP.PKG
NEUTRAL.Z
README.TXT

SETUP.EXE -

This is the setup program for the Print Server's Windows based
configuration utility - WPCONFIG.


README.TXT -

This is the file you are currently reading.


============================================================================

WHAT IS WPCONFIG?
---------------
WPCONFIG is a Windows based utility program designed for the network
administrator to remotely configure and manage the Print Server print
server products.  WPCONFIG can be used on Microsoft's Windows 3.1, Windows
for Workgroups, Windows 95, and Windows NT platforms.  WPCONFIG uses IPX/SPX
protocol to communicate with the active Print Server devices.

BEFORE INSTALLING WPCONFIG
------------------------
Before you install WPCONFIG program on your workstation, you must make
sure that the following software has been loaded:

ON WINDOWS NT WORKSTATIONS --

Click on control panel and then click on network icon to bring up your
network setup menu.  Check to see if the following software has been
installed on your workstation:

1) NetWare Gateway Service (for NT version 3.5.1)
   Client Service for NetWare (for NT version 3.5)
2) NWLINK IPX/SPX Compatible Transport

If not, then you need to select "Add software" function to install these
two software.  After you install the software, you need to restart the
workstation.  If you are prompted with "Select Preferred server for NetWare"
message, simply click "Cancel" if you do not have a Novell server on your
network.  You do not need to log in to a Novell file server to use the WPCONFIG
program.

ON WINDOWS 95 WORKSTATIONS --

Click on control panel and then click on network icon to bring up your
network setup menu.  Make sure that the "Client for NetWare Network" & "IPX/SPX
Compatible Transport" are both installed.  If not, then you need to click on
Add button to install these software.  You do not need to setup a Novell's
preferred server or log in to an existing Novell file server to use the WPCONFIG
program.

ON WINDOWS 3.1 OR WINDOWS FOR WORKGROUPS 3.11 WORKSTATIONS --

Make sure that the Novell workstation drivers are properly loaded on your
workstation.  You do not have to log in to a Novell file server to use
WPCONFIG program.

INSTALLING WPCONFIG
-----------------
To install WPCONFIG on your Windows 3.1, Windows for Workgroups, or
Windows NT workstation:

1. Insert CD_PS001 into your cd-rom drive.
2. Make sure Windows is already running.  If not, type WIN at the DOS
   prompt.
3. Choose Run from the File menu in the Program Manager.  The Run dialog
   box appears.
4. Type letter:\Utility\Wpconfig\setup depending on which letter you used
   for your CD-ROM.Click OK to start the setup.
5. Follow the instructions on your screen.

To install WPCONFIG on your Windows 95 workstation:

1. Insert CD_PS001 into your cd-rom drive.
2. Click Start, point to Run, then click.
3. Type the drive letter containing the CD_PS001, followed by :\setup.
   For example F:\setup.  Click OK to start the installation.
4. Follow the instructions on your screen.